SGS KYOCERA 46461 Carb Hta Solid Carbide End Mill Radius 12MM 00R Lathe Tool

( Brand: Sgs Kyocera ), ( Part Type: Lathe ), ( End Type: Corner Radius ), ( End Mill Type: Solid Carbide Radius Endmill ), ( Overall Length: 83mm ), ( Manufacturer Part Number: 46461 ), ( Length Of Cut: 26mm ), ( Shank Diameter: 12mm )

Review SGS KYOCERA New 12mm Z carb hta Solid Carbide End Mill 00r Radius Lathe Tool

The SGS Kyocera 46461 12mm Z-Carb-HTA solid carbide end mill is a high-performance lathe tool designed for heavy-duty machining applications. This end mill features a 12mm shaft diameter and a 0.00r (zero radius) end geometry, making it ideal for producing precise, round bottom holes and pockets in various materials.

The Z-Carb-HTA designation signifies that this end mill is made of Kyocera's premium grade, high-performance solid carbide material. The HTA (High Temperature Aluminum Oxide) coating provides superior wear resistance, allowing the tool to last longer and maintain its sharp cutting edges even during prolonged cutting.

The 12mm shaft diameter offers increased rigidity, reducing deflection and vibration during cutting. This not only improves tool life but also ensures better surface finish and accuracy. The 0.00r end geometry provides a round bottom radius, ensuring smooth tool engagement with the workpiece and reducing the likelihood of tool breakage.

The solid carbide construction of the SGS Kyocera 46461 also provides excellent heat conductivity, allowing the tool to dissipate heat efficiently and maintain its cutting performance even during high-speed or heavy-duty machining. This end mill is suitable for machining various materials, including steel, cast iron, and aluminum alloys.

This end mill comes with a 6 flute design, which provides efficient chip evacuation, reducing the risk of tool clogging and ensuring consistent cutting performance. The flute design also allows for multiple cutting edges, increasing the tool's overall cutting efficiency and longevity.

The SGS Kyocera 46461 12mm Z-Carb-HTA solid carbide end mill is a high-quality, durable tool designed for precision machining applications where maximum tool life, rigidity, and cutting efficiency are essential. Its premium solid carbide construction, advanced HTA coating, and 0.00r end geometry make it an excellent choice for producing round bottom holes and pockets in a wide range of materials.

A Detailed Analysis of buying a SGS Kyocera 46461 12mm Z-Carb-HTA Solid Carbide End Mill (00R Radius) for Lathe Use

The SGS Kyocera 46461 12mm Z-Carb-HTA Solid Carbide End Mill (00R Radius) is a popular choice among lathe users due to its durability and excellent cutting performance. In this analysis, we will discuss the pros and cons of purchasing this end mill to help you make an informed decision.

1. Superior cutting performance: Solid carbide end mills are known for their exceptional cutting performance, and the SGS Kyocera 46461 is no exception. It can handle a wide range of materials, including steel, brass, and aluminum, with ease.

2. Long tool life: The use of high-quality, single-crystal tungsten carbide in the tool's construction makes it highly resistant to wear and chipping. This results in longer tool life, reducing the frequency of replacements and saving you money in the long run.

3. High rigidity: The solid carbide construction provides excellent rigidity, which is crucial for maintaining accuracy and consistency during machining operations.

4. Versatility: The 12mm shank size and 00R radius make this end mill suitable for various applications, including facing, contouring, and slotting.

1. Higher initial cost: Compared to high-speed steel (HSS) end mills, solid carbide end mills like the SGS Kyocera 46461 have a higher initial cost. However, the longer tool life and superior cutting performance usually justify the investment.

2. Requires careful handling: Due to their brittleness, solid carbide end mills require more careful handling than HSS tools. Dropping or subjecting them to extreme temperatures can result in damage.

3. May require specific machining techniques: To maximize the performance and tool life of solid carbide end mills, it's essential to use the correct machining techniques, such as proper feed rates, cutting speeds, and coolant usage.

The SGS Kyocera 46461 12mm Z-Carb-HTA Solid Carbide End Mill (00R Radius) offers several advantages, including superior cutting performance, long tool life, high rigidity, and versatility. However, it comes with a higher initial cost and requires careful handling. Ultimately, if you're looking for a high-performing, durable end mill for your lathe that can handle various materials and applications, the SGS Kyocera 46461 is an excellent investment.

If you're in the market for a new end mill for your lathe and are looking for superior cutting performance, long tool life, and versatility, the SGS Kyocera 46461 12mm Z-Carb-HTA Solid Carbide End Mill (00R Radius) is a strong recommendation. While it does come with a higher initial cost, the benefits it offers can save you time and money in the long run. As always, ensure you're using the correct machining techniques for optimal performance and tool life.

part # 46461 prices

• $19.75-$40.00

specifications cncmano:

• brand: Sgs Kyocera
• part type: Lathe
• end type: Corner Radius
• end mill type: Solid Carbide Radius Endmill
• overall length: 83mm
• manufacturer part number: 46461
• length of cut: 26mm
• shank diameter: 12mm

general cncmano:

• condition: New
• Metalworking Supplies > End Mills > Roughing Router End Mills

returns cncmano:

• paid by: Buyer
• method: Money back
• policy: Returns Accepted
• time: 30 Days

seller cncmano:

• rating: 99.8%
• # reviews: 17730

shipping cncmano:

• cost: $0.00
• service: Economy
• type: Fixed
• transit: 2-6 Days
• class: Economy

payments cncmano:

• other
• wallet: Google-pay
• credit card: Visa

offer cncmano:

• started: July 8, 2025
• sold: 0
• availability: In Stock
• options: Ship-to-home

Sgs Kyocera 46461 Is Similar To:

• Kyocera 40121 Lot 5 Pcs 3mm Sgs Solid Carbide End Mills Lathe Cnc Tool Bits (61.6% similar) $19.75–$39.58. (January 23rd, 2025)
• Kyocera 51110 Lot 5 Pcs New 5/32 Inch Sgs Solid Carbide Machinist Cnc Drills (47.5% similar) $29.75–$97.95. (February 2nd, 2025)
• Kyocera 30147 Lot 5 Pcs New 3/8 Inch Sgs Solid Carbide End Mills Machinist Tools (59.8% similar) $24.80–$26.00. (February 2nd, 2025)
• Accupro 09550575 New 3/4 Inch Sgs Carbide Bur 100 Degree Chamfer End Mill Chamfering Tool (43.9% similar) $19.95–$78.40. (February 18th, 2025)
• Kyocera 31734 New Lot 2 5/8 Inch Sgs Long 5 Length Solid Carbide End Mill Tools (52.8% similar) $17.99–$410.00. (March 6th, 2025)
• Sgs Kyocera T96179tx New 1/2 Inch Solid Carbide End Mill .040 Radius Lathe Tool (83.4% similar) $29.75–$89.75. (April 20th, 2025)
• Kyocera Ser-1l New Lot 2 5/8 Inch Sgs Long 5 Length Solid Carbide Radius End Mill Tool (50.6% similar) $30.00–$49.75. (May 9th, 2025)
• Kyocera 34153 Lot 2 New 3/8 Inch Sgs 34513 Long 4 Length Solid Carbide Endmills Tools (54.4% similar) $50.00. (June 5th, 2025)
• Kyocera 32674 Lot 5 Pcs Sgs Carbide 1/4 Inch V-carb End Mills Machinist Tools (48.4% similar) $69.00. (June 9th, 2025)
• Sgs Kyocera 74216 New 5/8 Inch Carbide Bur 90 Degree Countersink Chamfering Burr Tool (47.3% similar) $19.75. (June 15th, 2025)
• Kyocera 63641 New Sgs 9.6mm Solid Ta Ic Ice-carb Jobber Length Carbide Coolant Drill (42.9% similar) $39.75. (June 15th, 2025)