ALTRONIX Poe Transceiver EBRIDGE1ST-EOC Poe/poe

( Brand: Altronix ), ( Part Type: Transceiver ), ( Manufacturer Part Number: EBRIDGE1ST )

Review ALTRONIX And Poe/poe Transceiver

The Altronix EBridge1-ST EBridge1-EOC POE/POE Transceiver is a versatile and powerful networking device designed for security cameras and access control systems. This transceiver is part of Altronix's EBridge Series, which is known for its reliability and ease of use.

The EBridge1-ST Transceiver is a two-port device, capable of Power over Ethernet (PoE) and Power over Ethernet Plus (PoE ) transmission on both ports. This means it can provide power and data to two connected devices, such as IP cameras or access control readers, without requiring additional power sources. The transceiver also supports Passive PoE, allowing it to power devices that do not require PoE, making it a flexible solution for various installation scenarios.

The device is built with robust components, ensuring reliable performance even in harsh environments. It features a rugged aluminum housing, which protects it from physical damage and environmental factors. The device also has a wide operating temperature range, making it suitable for use in various climate conditions.

The EBridge1-ST Transceiver is also designed with ease of installation in mind. It features a plug-and-play design, allowing users to connect devices with minimal configuration. The device also supports auto-sensing technology, which automatically adjusts power levels to ensure optimal performance for connected devices.

The EBridge1-ST Transceiver is also equipped with various safety features, including over-current protection, over-voltage protection, and short-circuit protection. These features help prevent damage to the device and connected devices, ensuring a safe and reliable installation.

In summary, the Altronix EBridge1-ST EBridge1-EOC POE/POE Transceiver is a versatile and robust networking device designed for security cameras and access control systems. Its two-port design, support for PoE and PoE , and rugged construction make it a reliable solution for various installation scenarios. Its plug-and-play design, auto-sensing technology, and safety features make it easy to install and use, making it a popular choice for installers and integrators.

The Altronix EBridge1-ST EBridge1-EOC POE/POE Transceiver is a networking device designed to convert PoE (Power over Ethernet) to PoE (PoE Plus) or vice versa between two separate Ethernet networks. Here are some pros and cons that may help you decide if this device is right for your needs:

1. PoE and PoE Compatibility: The EBridge1-ST transceiver supports both PoE and PoE , making it a versatile option for networks that use different power standards.

2. Remote Power Pass-Through: The device allows for remote power pass-through, enabling you to power devices at the remote end of a PoE network without requiring an additional power source.

3. Rugged Design: The EBridge1-ST is designed to operate in harsh environments, making it a suitable choice for outdoor or industrial applications. It has an operating temperature range of -40 F to 140 F (-40 C to 60 C) and is protected against surges and electromagnetic interference.

4. Easy Installation: The device features a plug-and-play design, making it simple to install and configure. It can be mounted on a DIN rail or installed in a standard 19-inch rack.

5. Energy Efficiency: The EBridge1-ST uses Energy Efficient Ethernet (IEEE 802.3az) to reduce power consumption when there is little network traffic.

1. Limited Port Count: The device only has one PoE/PoE port, which may not be sufficient for larger installations requiring multiple power and data connections.

2. Cost: The EBridge1-ST is priced higher than some other similar transceivers on the market, which may be a consideration for budget-conscious buyers.

3. Limited Management Features: The device does not offer advanced management features like SNMP or CLI, which may be important for larger networks or more complex installations.

The Altronix EBridge1-ST EBridge1-EOC POE/POE Transceiver is a reliable and versatile option for converting PoE to PoE or vice versa in harsh environments where remote power pass-through is required. Its rugged design, energy efficiency, and easy installation make it a good choice for outdoor or industrial applications. However, its limited port count and higher cost compared to some other transceivers may be a drawback for some users. Ultimately, the decision to purchase the EBridge1-ST depends on your specific network requirements and budget.

If you need to convert PoE to PoE or vice versa in a harsh environment where remote power pass-through is required, and you have a limited number of connections, the Altronix EBridge1-ST EBridge1-EOC POE/POE Transceiver is a solid choice. However, if you require more ports or advanced management features, you may want to consider other options with a lower price point.

part # ebridge1st prices

• $40.99-$80.90

specifications cncmano:

• brand: Altronix
• part type: Transceiver
• manufacturer part number: EBRIDGE1ST

seller cncmano:

• rating: 100.0%
• # reviews: 478

shipping cncmano:

• class: Standard
• transit: 2-5 Days
• type: Fixed
• carrier: UPS
• cost: $0.00
• service: UPS Ground

general cncmano:

• Business Industrial > CNC, Metalworking Manufacturing > Other CNC, Metalworking Manufacturing
• condition: New Open box

offer cncmano:

• best offers: True
• availability: In Stock
• started: October 16, 2025
• sold: 0
• options: Ship-to-home
• quantity: 1

returns cncmano:

• policy: Returns Accepted
• time: 30 Days
• method: Money back
• paid by: Buyer

payments cncmano:

• other
• credit card: Discover
• wallet: Paypal